Fixed prices from $199 Owner-operated by Jack · no subcontractors Priced from aerial imagery, no site visit

Service

Gutter guard installation

Mesh fitted over freshly cleaned gutters so leaves slide off the roof instead of into the gutter. It is worth having on some houses and a waste of money on others. This page is meant to help you work out which yours is.

  • Gutters cleaned and downpipes checked before any mesh goes on
  • Fitted to suit the roof: tile, corrugated or flat-pan metal
  • Whole house, or only the runs under the trees

Price gutter guard for your roof

Tell Jack your suburb and he will text you a price. Add the street address and he sizes the roof up on aerial imagery for a fixed figure, with no site visit.

Jack is away until next week. Send your enquiry anyway — it’s first in the queue when he’s back.

Goes straight to Jack’s phone. Your number is only used to send the price and arrange a day.

Who gutter guard is actually for

Gutter guard earns its cost when at least one of these is true:

  • Large trees overhang the roof and the gutters fill more than once a year.
  • The house is two storeys or steep-roofed, so every clean is the expensive kind.
  • The property is near bushland, where dry leaf litter in the gutters is a fire risk and not just a drainage problem.
  • Birds or possums are getting in under the roof edge at the gutter line.

If you live on a newer estate with young street trees and a single-storey roof, a clean every year or two is cheaper than mesh and always will be. We would rather tell you that than fit something you do not need.

What it stops, and what it doesn’t

Mesh is a sieve, and what gets through depends on the size of the holes. Fine mesh keeps out eucalypt leaves, bark, twigs and gumnuts, which is the bulk of what blocks gutters across Sydney. It will not keep out silt, roof grit or the finest plant material, and some of what it stops will sit on top of the mesh until wind or rain shifts it.

Casuarina needles deserve their own mention. They are thin enough to thread through coarse mesh and long enough to weave into a mat on top of it. If she-oaks are your problem tree, the mesh has to be fine and the roof still needs an occasional sweep.

The pitch of the mesh matters as much as the mesh. Guard that follows the slope of the roof down to the gutter lip sheds leaves. Guard that sits flat across the top of the gutter collects them in a neat tray.

Near bushland: use metal

Most houses lost in bush fires are lit by embers rather than by the fire front, and dry leaf litter in a gutter is exactly the kind of fuel an ember needs. Keeping litter out of the gutters is the reason gutter guard appears in bush fire preparation advice at all.

The catch is that plastic mesh can melt or burn. On bush fire prone land the guard should be non-combustible: steel or aluminium mesh with metal trims and fixings. If you are not sure whether your block is mapped as bush fire prone, check before you choose a product, because it is much easier to fit the right mesh once than to replace the wrong one.

How it is fitted

  1. The gutters are cleaned out and the downpipes checked. Guard over dirty gutters locks the debris in.
  2. Any damage is flagged. Rusted or sagging sections are far easier to deal with before mesh goes over them.
  3. Mesh is cut to each run and fixed at the roof side and at the gutter lip, with trims matched to the roof profile so nothing can get under it.
  4. Valleys and corners are finished properly. These carry the most water and the most leaf, and they are where cheap installs fail.

Questions

Gutter guard: common questions

Does gutter guard mean I never clean my gutters again?

No, and anyone who says so is selling something. Good mesh keeps leaves, twigs and gumnuts out, which is most of the problem. Fine material still gets through or settles on top: silt, casuarina needles, blossom and the dust that washes off the roof. Guarded gutters need checking every couple of years rather than cleaning every year.

Which type of gutter guard is best?

For most houses, a fine metal mesh that runs from under the roofing to the front edge of the gutter, so leaves slide off rather than sit in a tray. Aluminium and steel meshes both work; the choice between them mostly comes down to matching the roof metal and whether the house is on bush fire prone land. Brush inserts and foam fillers that sit inside the gutter are cheaper but trap debris where you cannot see it.

I’m near bushland. Does that change which mesh I should have?

Yes. If your property is on bush fire prone land, any gutter guard or leaf guard fitted should be made of non-combustible material such as steel or aluminium, not plastic. Your council’s planning certificate or the NSW Rural Fire Service online tool will tell you whether your address is mapped as bush fire prone.

Can gutter guard go on a tile roof and a metal roof?

Both, but it is fitted differently. On a tile roof the mesh is slid under the bottom row of tiles. On a corrugated or flat-pan metal roof it is fixed to the roof sheet with a profile-matched trim so there are no gaps under the ribs. Valleys, where two roof planes meet and most of the leaf load comes down, need their own treatment.

What does gutter guard cost?

It depends on the metres of gutter, the number of storeys, the roof type and the mesh, so there is no honest flat rate. Send the form with gutter guard selected and we will text you a price for your roof. The gutters are cleaned first: mesh fitted over full gutters just seals the problem in.

Can I guard just one side of the house?

Often that is the sensible answer. If one big tree overhangs one run of gutter and the rest of the roof is clear, guarding that run deals with most of the trouble for a fraction of the cost of the whole house.

Related: gutter cleaning · downpipe clearing · gutter cleaning cost in Sydney

See what it would cost on your roof

Send the form with gutter guard selected, and say in the note if it is only one side of the house.

Get a price
Get a fixed price